Samsung SVM 400 User Manual page 43

Telephone system

Hide thumbs Also See for SVM 400:

Table of Contents

Auto Play Message Info If this option is set, the sender information and time will be automatically played for

each message. If this is not set to Y, the caller can still get this information on demand by pressing '00' while a

message is playing.

Message Alert Controls

Alert On A 'Y' in this field enables Message Alert capabilities for this mailbox. An 'N' disables the

Message Alert feature. This parameter setting may be overridden by the phone interface.

Alert Phone Number This is the phone number where you want to be notified of your new messages if

you have enabled message alert in your mailbox.

Message Waiting Indications

In version 1.2 and later these are not accessible. Previous software versions allowed access to them but the

fields were not used by the SVM 400 software. The 'Mailbox has Message Waiting Light' is fixed as Yes for all

mailboxes that have an extension associated with them.

Message Auto Forward

Enable Auto Forward This option turns Auto Forward on. When set any messages arriving in this mail-

box will be automatically forwarded.

Delete After Forwarding The new message that is to be Auto Forwarded will be discarded from this mail-

box, when the forwarding takes place, if this parameter is set to 'Y'. If this parameter is set to 'N' the mailbox

will retain a copy of the message that is Auto-Forwarded. This parameter is only active when 'Auto-Forward

Message After' parameter is set.

Auto-Forward Delay The number of hours and/or minutes before a new message is automatically for-

warded to another mailbox. Auto forwarding is disabled if this parameter is left blank. The range for this is

from 0 (no forward) to 23:59 (almost one day).

Pager Notification Enabled A 'Y' enables the pager notification of new messages received. A 'N' disables

this option.

Pager Station The type of station block to use for pager outdials. Press ENTER to bring up the Target

Generator. Select a new or existing Station Block and press ENTER. Press Ctrl+0 to review or edit the select-

ed Station Block.

SVM 400 Technical Manual Page 42

HOME

PAGE

Table of

Contents

Table of Contents