5-2-6 Main-assembly E (for SMP715C type)
Part name
① Frame-rotator ass'y
② Shaft-pivot -2ea.
③ Spring-rear open
④ Ring-e hole (ø5.0) -2ea.
⑤ Auto cutter ass'y
⑥ Screw-taptite (M3×5)
Rev. 2.00
1. Attach ① Frame-rotator ass'y on Frame-main and then insert two
② Shaft-pivot and two ③ Spring-rear open. And assemble two
④ Ring-e hole (ø5.0) to two ② Shaft-pivot.
2. Tighten ⑤ Auto cutter ass'y on ① Frame-rotator ass'y with ⑥
Screw-taptite (M3×5).
3. Grease two Shaft-locking, the hooks of Frame-clamshell locking
and the groove of Frame-pivot locking-L/R.
6
5
1
3
4
- 92 -
Assembly procedure
2
2
3
SRP-275
4