Main-Assembly C - Samsung SRP-275 Service Manual

5-2-3 Main-assembly C

Part name
① Frame basket ass'y
② Screw-taptite (M3×6) -2ea.
③ Shaft-head_guide
④ Lever-ad -2ea.
⑤ Shaft-head carriage
⑥ Ring-e hole (ø3.0)
⑦ Printer-head
⑧ Screw-tapping (M3×10) -2ea.
⑨ Bracket-head-cover-L
⑩ Bracket-head-cover-R
⑪ Screw-taptite (M2.6×3) -2ea.
Rev. 2.00
1. Tighten ① Frame basket ass'y on Frame-main with two ②
Screw-taptite (M3×6).
2. Insert Carriage head ass'y to ③ Shaft-head_guide and then
insert ③ Shaft-head_guide into two holes of Frame-main.
3. Insert two ④ Lever-ad to the end of ③ Shaft-head_guide and then rotate
two ④ Lever-ad downward. And oil ③ Shaft-head_guide with G948P.
4. Insert ⑤ Shaft-head carriage in two holes the Frame-main and
then assemble ⑥ Ring-e hole (ø3.0) to ⑤ Shaft-Head carriage.
5. Insert FPC-head in ⑦ Printer-head and then tighten ⑦ Printer-
head on Carriage head ass'y with two ⑧ Screw-tapping
(M3×10). And grease ⑤ Shaft-head carriage and the triangle part
of Carriage head ass'y.
6. Tighten ⑨ Bracket-head-cover-L and ⑩ Bracket-head-cover-R
on Frame-main with each of ⑪ Screw-machine (M2.6×3).
2
11
9
4
6
5
Assembly procedure
2
1
8
8
7
11
10
- 89 -
SRP-275
3
4