General Specifications - Samsung SRP-275 Service Manual

3-2 General Specifications

Item
Product
Processor
Memory
Serial interface
(RS-232C)
Parallel interface
(IEEE 1284)
USB
Printer
Auto cutter
Power consumption
AC adaptor
Environment condition
Weight (kg)
Dimensions (mm)
Rev. 2.00
Description
• SRP-275 : RS-232 Serial communication
• SRP-275P : IEEE 1284 Parallel communication
• SRP-275U : USB communication
• SAMSUNG S3C4640 (32bit)
• Flash : 8Mbits (M29F800DB)
• DRAM : 16Mbits
• Flow control
① DTR/DSR (H/W flow control)
XON/XOFF (S/W flow
②
• Baud rate : 2400/4800/9600/19200
• Receive buffer : 8Kbytes
• Connector : DB25P female (I/F PBA side)
• Mode
Forward mod e : Compatibility mode
①
Reverse mode : Nibble / Byte mode
②
• Connector : Self-powered
• Transfer type : BULK
• Speed : 12Mbps (Full-speed)
• Power : Self-Powered
• Printing method : 9pins serial impact
• Printing speed : 5.1 lines/sec
• Type : Rotary
• Cutting method : 1 point partial cutting
• Approx. 36W
• Input : AC 100V~240V, 50Hz~60Hz
• Output : DC24V±5%, 1.5A
• Temperature : 0 ~40
℃ ℃
• Humidity : 30%~80%
• Packing : Approx.3.9kg (A type) / 4kg (C type)
• Unpacking : Approx. 2.4kg (A type) / 2.5kg (C type)
• A / C type : 160×239×157
control)
- 34 -
SRP-275
Remark
The flow control,
Baud rate, Stop bit
and Parity are
determined by DIP
Switch position.