2-7. Setting of Function Memory
2-7-1. Setting of New Function Memory
n
Perform this adjustment with the external signal input. For a blank signal, adjustment cannot be performed.
Procedure
Fig. 2-7-1a
1. The items below are adjusted.
(Refer to "2. FUNCTION MEMORY window" in "2-8-3. Functions of Each Window".)
INPUT CONTROL
LAMP POWER (*1)
COLOR
_ Color Space
_ Color Temp
_ Gamma
PICTURE CONTROL
_ Signal Source
Signal Mode
I/P Mode
_ Signal Adjust
Contrast
Brightness
Color
Sharpness
MASKING ADJUST
ANAMORPHIC MODE
ELECTRIC V SHIFT FUNCTION
LENS CONTROL
_ ZOOM
_ FOCUS
(*1):
Setting of lamp power: After the zoom adjustment of a lens, adjust using lamp power so that the screen illuminance becomes the desired
brightness.
SRX-R320
2-33