1-9. Installing LMT-300 and Connecting with the Unit
1. Remove the panel (U7) block assembly. (Refer to Section 1-1-2.)
2. Remove the panel (U2) block assembly. (Refer to Section 1-1-3.)
3. Remove the panel (U6). (Refer to Section 1-1-5.)
4. Remove the panel (U1B). (Refer to Section 1-1-7.)
5. Loosen the two screws (with drop-safe), then remove
the front panel from the LMT-300.
SRX-R320
LMT-300
Screw
(with drop-safe)
Front panel
Fig. 1-9a
Screw
(with drop-safe)
1-23