Port - GE Digi-4 Installation Manual

18 Digia
Installation Manual

Port

When one or more Digias, are connected through an IP sharing
device to a larger network, and you want to access each unit from
outside the local area network, each device needs to have a
unique RTSP (Real Time Streaming Protocol) port number. You
must also configure your IP sharing device for port forwarding,
so that each port, when accessed on the IP sharing device, will
forward to the appropriate Digia. This port number is listed next
to the Port menu option in the Network menu. If you only plan
to access the units from within the same local area network, the
RTSP port does not have to be changed.
To access the Digia unit, you must know the following
information:
When accessing from inside the
same local area network
IP address of the Digia
RTSP port
Username
Password
1. Make sure that port forwarding has been enabled on the IP sharing device
and that the port number is set to be forwarded by the IP sharing device to
the Digia unit. See your IP sharing device documentation or your system ad-
ministrator for more information.
In either case, put the information in the appropriate fields in the
Digia client camera assignment window. For more information
on the Digia client, see the Digia Client User Manual.
When accessing from outside the
local area network
IP address of the IP sharing device
RTSP port
1
Username
Password