Table of Contents
Advertisement
COMPONENTS (Fig. 1–3)
WARNING: Never modify the power tool or any part of it. Damage or personal
injury could result.
A. Measurement trigger
B. Battery release button
C. D
WALT 10.8 V Lithium Ion Battery
E
D. Main handle
E. IR sensor
F. Laser/pointer beam
G. LCD screen
H.
Alarm mode button: is used to select the type of alarm and to set the
high (HAL) and low (LAL) temperature limits for the alarm.
Alarm 1 – temperature has reached the set limit, indicated by the red/blue LED
(M)
Alarm 2 - temperature has reached the set limit, indicated by a beeper sound
Alarm 3 – temperature has reached the set limit, indicated by both the LED and
the beeper
I.
Min/Max/Avg Mode Button: Displays either the lowest, highest or average
temperature.
J.
Adjustment Button: Used with each mode button to set desired value.
K.
EMS Mode Button: Set emissivity value.
L.
C/F Mode Button: Used to set temperature units of measure (Celsius or
Fahrenheit).
M. LED Indicator - Active in Alarm 1 and Alarm 3 modes.
Blue: serves as alarm to show that temperature has reached the set minimum.
Red: servers as alarm to show that temperature has reached the set maximim.
N. Battery charger
FIG. 2
DCT414-XE
B
C
SCREEN ICONS: (FIG. 3)
Hold – will display after you release the trigger to let you know the last
temperature read.
Scan – will display while you hold the trigger down looking for differing
temperatures.
7
LOCATED
ON SIDE
OF TOOL
A
D
O
P
Advertisement
Table of Contents
