Canon iPF6100 Service Manual page 450

Chapter 8
E196-4040
E196-4041
E196-4042
E196-4045
E196-404C
E196-404D
E196-404E
E198-401C
E198-401D
E198-401E
E199-404B
E602-401A
E602-401B
8-26
Code* Description
Checksum error
Flash memory erase error
Flash memory write error
EEPROM write error
Serial number mismatch between boards
Machine ID mismatch between boards
EEPROM read error
RTC error
RTC low battery error
RTC clock stop
Temperature/humidity sensor board
connector out of position
HDD failure
HDD connection error
Action
Replace the main controller PCB.
Replace the main controller PCB.
Replace the main controller PCB.
Replace the main controller PCB.
Execute PCB replacement mode or replace the main
controller PCB.
Replace the main controller PCB.
Replace the main controller PCB.
Replace the lithium battery or replace the main controller
PCB.
Replace the lithium battery or replace the main controller
PCB.
Replace the lithium battery or replace the main controller
PCB.
Check the temperature/humidity sensor board connector
or replace the board.
Replace the HDD unit.
Check the HDD connector/Replace the HDD unit.