Chapter 4
3) Remove the three screws[1], and then remove the tube guide[2] and the wire guide[3].
4) Remove the front duct[3] by removing the four screws[2] and freeing ink tube from the guide[1].
5) Turn the pulley[1] in the direction of the arrow so that the spur unit[2] is at the top position.
4-30
[1]
[2]
[3]
F-4-62
[2]
[1]
F-4-63
[1]
F-4-64
[3]
[2]
[2]