1) When removing the right cover[3], open the top cover, and then remove the roll feed unit, right circle cover, right upper cover, operation panel, mist filter, exhaust

filter, and lower rear cover.

2) Remove the six screws[1] and hook[2], and then remove the right cover[3].

Note on attaching the right cover

Be careful in attaching the right cover not to press the ink tubes with the edges of the cover.

o) Right front cover

Removing the right front cover

1) When removing the right front cover[2], open the top cover, and then remove the roll feed unit, output guide, right circle cover, operation panel, exhaust filter,

right cover, and lower rear cover.

2) Remove the two screws[1], and then remove the right front cover[2].

[3]

[1]

[2]

F-4-20

F-4-21

[1]

[2]

F-4-22

[1]

Chapter 4