1) When removing the lower back cover[2], open the top cover, and then remove the roll feed unit, left circle cover, tank cover, left cover, lower rear cover, lower

rear left cover, left rear cover, right circle cover, right upper cover, operation panel, exhaust filter, and right cover.

2) Remove the two screws[1], and then remove the lower back cover[2].

w) Cover guide

Removing the cover guide

1) When removing the cover guide[2], open the top cover, and then remove the roll feed unit, left circle cover, tank cover, left cover, right circle cover, right upper

cover, operation panel, exhaust filter, lower rear cover, lower rear left cover, left lower cover, rear cover, upper rear cover, upper front cover.

2) Remove the two screws[1], and then remove the cover guide[2].

x) Cover support plate (right)

Removing cover support plate (right)

1) When removing the cover support plate (right)[2], open the top cover, and then remove the roll feed unit, left circle cover, tank cover, left cover, right circle

cover, right upper cover, operation panel, exhaust filter, right cover, lower rear cover, left rear cover, rear cover, upper rear cover, upper front cover, and cover guide.

2) Remove the three screws[1], and then remove the cover support plate (right)[2].

[1]

F-4-30

[1]

[2]

F-4-31

[1]

F-4-32

[2]

[1]

Chapter 4

4-15