Bosch CCS 800 Ultro Installation And Operating Manual page 21

CCS 800 Ultro | Installation and Operating Manual
7.3.4 Selecting the bit rate
1 Press the up or down button to change the value (bit
rate). The following bit rates are available:
- 64 kbps
- 96 kbps
- 128 kbps
- 192 kbps
- 256 kbps
2 Press the select button to select the next value to
change (see following section).
7.3.5 Set microphone to continuous
recording
Note
If more than 50 delegate units are connected (by
using additional control units), the option "record
when one or more microphones are active" may
not work correctly (also see section 5.2).
1 Press the down button to switch between constant
recording or record when one or more microphones
are active (see table 7.2).
2 Press the select button to select the next value to
change (see following section).
Bosch Security Systems B.V. | 2007-08
7.3.6 Set internal/ external recording
options
1 Press the down button to switch between record to
the SD card or record to the internal memory (see
table 7.2).
2 Press the change mode button (1) to exit the set-up
mode.
en | 21