Bosch CCS 800 Ultro Installation And Operating Manual page 19

CCS 800 Ultro | Installation and Operating Manual
7.3.1 Overview of set-up icons
table 7.2: Overview of icons for navigating set-up screens
Icon Icon name
Next (displayed at lower
left of set-up screen)
Select
Down
Up
Date
Time
Bit rate
Microphone recording
Constant recording
Confirm delete
Delete file
Cancel delete
Record to card
Record to memory
Hourglass
SD card status
Bosch Security Systems B.V. | 2007-08
Function of icon
Go to next set-up screen. This icon is also displayed at the top left of
the set-up screen to indicate that the other modes can be selected at
any time, by pressing the change mode button (1).
Selects next value to change.
Decreases value, or selects another value or file.
Increases value, or selects another value or file.
Indicates that the date set-up screen is selected.
Indicates that the time set-up screen is selected.
Indicates that the bit rate set-up screen is selected.
Unit will only record if one or more microphones are active.
Unit will constantly record (one or more microphones do not have to
be active).
Confirms file to be deleted.
Permanently deletes selected file.
Cancels the delete file command.
Sets up recording so that files are saved to the SD card. Data will still
be saved to the internal memory during card exchange, as described
in section 7.4.3.
Sets up recording so that files are saved to the internal memory.
Initializing SD Card.
Card flashing at 2 Hz: card is initializing.
Card flashing at 5 Hz: card is either: full, write protected, or
incompatible.
en | 19