Digital Audio Players, Etc; Starts Playback; Adjusting The Input Level - Kenwood K-531 Instruction Manual

Digital audio players, etc.

Preparation:
Connect a component (such as a digital audio player) to the AUDIO IN
terminal on the rear panel. Refer to "Other connections (commercially
available accessories)" for connection (P.9).

Starts playback

1
2

Adjusting the input level

Use this adjustment when the volume from a component (such as a digital
audio player) is noticeably higher or lower than other input sources at the
same volume setting.
1
2
3
4
5
To change the display information
Press [ DISPLAY ] repeatedly.
Each time you press the button, the display changes as....
Refer also to the instruction manual that comes with the component connected to the System.
Press [AUDIO IN].
You can also start playback on the main unit by pressing [INPUT]
to change the input source to "AUDIO IN".
Operate the component (such as a digital audio player) to
start playback.
Press [AUDIO IN].
You can also start playback by pressing [INPUT] to change the
input source to "AUDIO IN" on the main unit.
Operate the component (such as a digital audio player) to
start playback.
Press [MODE].
Press [ 2 ] or [ 3 ] to select "INPUT LEVEL", then press
[ENTER].
Press [ 5 ] or [ ∞ ] to adjust the input level (–3 to +5), then
press [ENTER].
"AUDIO IN" = Day/Clock = (back to the beginning)
Safety Precautions
33
English