Bluetooth; Pairing This System With A Bluetooth Device - Kenwood K-531 Instruction Manual

BLUETOOTH

[ 7 PAIRING]
BLUETOOH LED
Main unit
Refer also to the instruction manual that comes with your BLUETOOTH device.
You can listen to music from your BLUETOOTH mobile phone or BLUETOOTH
device over a wireless connection.

Pairing this System with a BLUETOOTH device

When you connect a BLUETOOTH device to the System for the first time,
make pairing between the System and the device.
Once the pairing operation is complete, the BLUETOOTH device is
registered on the System.
You can register up to five devices*, but only one device can be connected
at a time.
* When a sixth BLUETOOH device is registered, the registration of the first
connected device is deleted.
1
Turn on the BLUETOOTH device.
Press [BLUETOOTH £¥8 ] to select "BLUETOOTH" source.
2
3
Press [BLUETOOH SETUP].
2 3
4
Press [ ] or [
The System enters pairing mode.
If no operation is done for about 5 minutes, pairing mode is
cancelled.
5
Operate the BLUETOOTH device to perform the pairing
operation.
"SUCCESS" appears on the display when pairing is completed.
When searching for this System with the BLUETOOTH device, this
System appears as "K-531".
BLUETOOTH LED on the main unit flashes during the pairing
process.
If you are required to enter PIN code during pairing operation,
input "0000".
After pairing is successful, the System will establish connection
with the BLUETOOTH device. (The BLUETOOTH LED on the main
unit lights up while the BLUETOOTH device is connected.)
You can also enter the pairing mode by holding [BLUETOOTH £¥8 ] or
[ 7 PAIRING] on the main unit while the BLUETOOTH device is turned
on.
] to select "PAIRING?", then press [ENTER].
Safety Precautions
25
English