9-46 Upgrading Your Server
Optical Disk Drive
You may replace the factory-installed optical disk drive with an optional DVD SuperMULTI drive.
IMPORTANT: Be sure to use the DVD SuperMULTI drive authorized
by NEC.
Replacement Procedure
Take the following steps to install the optional DVD SuperMULTI drive.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Remove the left side cover and front mask.
3.
Disconnect all the interface and power cables from the factory-installed optical disk drive.
4.
Remove the screw securing the hard disk drive bay.
5.
Pull out the file bay from the server while pushing the release tabs on top and bottom of
the file bay.
Screw
1
Release tab
1
2
Release tab