13.
Connect the interface cable and power cable to the floppy disk drive.
See Chapter 10 for cable connection.
14.
Install components and connect cables which were removed in Steps 1 through 3.
15.
Change setting for floppy disk drive on BIOS Setup menu.
1) Select [Main] → [Legacy Diskette A:], and select [1.44/1.25 MB 31/2"]. Then select
[Exit] → [Exit Saving Changes], and restart the server.
2) Run BIOS Setup menu and select the [Boot] menu. Put the cursor onto "Legacy
Floppy Drives" under "Excluded from boot order", and press x to move it to "Boot
priority order". Then, press + to move the item to the desired priority order.
* The position next to "CD-ROM" is recommendable.
Removal
The floppy disk drive can be removed in the reverse order of the installation.
Upgrading Your Server 9-45