Assembly & Set-Up - Cub Cadet CC 500 EL Operator's Manual

Assembly & Set-Up
Contents of Carton
• One Lawn Mower
• One Cord Guide Bar
Assembly
Handle
1. Remove any packing material which may be between
upper and lower handles.
a. Loosen each hand knob found on the inside of the
upper handle.
b. Gently lift and pivot the upper handle into the operating
position as shown in Fig. 3-1. Make certain the lower
handle is seated securely into the handle mounting
brackets.
8
• One Grass Catcher
• One Lawn Mower Operator's Manual
Figure 3-1
• One Side Discharge Chute
2. Tighten star knobs securing lower handle to handle
brackets. See Fig. 3-2. Make certain the lower handle is
seated securely into the handle mounting brackets.
Figure 3-2
Cord Guide Bar
Attach the cord guide bar with extension cord retainer to the
upper handle as shown in Fig. 3-3.
Figure 3-3
3