Samsung HG690 Installation Manual page 58

¦
Sound Bar
Samsung Sound-Bar & Hospitality TV
– Use Samsung Sound-Bar & hospitality TV support HDMI 1.4 to listen to TV sound on the Sound-Bar by using a
single HDMI cable.
– Supporting model.
Sound-Bar : HW-F350/F450/F550
Operation of "Hotel Mode" in Sound Bar
– The following items for the TV's hotel option menus should be set in advance.
Hotel option
Hotel option
Connect an HDMI cable from the HDMI OUT port of Sound-BAR to the HDMI2 port of hospitality TV.
After being connected to the 2013 hospitality TV via HDMI Cable, when the TV turns on, the Sound-Bar
automatically detects the TV and then, converts to "hotel mode" by itself.
The change with power-on volume & max volume on TV is applied to the connected sound-bar since TV
boots twice.
Features of "Hotel Mode" in Sound Bar
– Synchronized power on/off with TV.
– HDMI_CEC enabled.
– Accessible "HDMI OUT" port only. (Other inputs are disabled)
– Synchronizing "power-on"&"max" volume with the TV the Sound-Bar's volume is set at half of the TV.
– Adjustable "power-on"&"max" volume acquired from the TV's hotel option menu. Sound-Bar volume=TV
volume/2
– Example: If the volume settings in TV are "power-on volume=20 and max volume=90", the sound bar will
operates at volume=10, max volume=45.
58
English
[HG690_EURO]Install_Guide-00ENG.indd 58
Power On Power ON Volume = "Enable" / Power ON Vol / Max Vol
External Device Sound Bar Out = "On"
*This function may differ depending on the model.
2013-03-21 4:37:03