Samsung HG690 Installation Manual page 22

No
Category
12 Bathroom Speaker
13 Eco Solution
14 Logo/Message
15 Cloning
16 REACH Server
22
English
[HG690_EURO]Install_Guide-00ENG.indd 22
Hotel TV Function
Item initial value
Sub AMP Mode 2
Sub AMP Volume 6
Energy Saving Off
Welcome
OFF
Message
Edit Welcome
Message
Hospitality Logo OFF
Hospitality Logo
...
DL
Logo Display
...
Time
Clone TV to USB
Clone USB to TV
Setting Auto
OFF
Initialize
REACH Server
1hour
update Time
REACH Update
OFF
Immediate
REACH Server
87
Channel
REACH Server
0000
Version
REACH Server
All
Group ID
S-LYNK REACH OFF
S-LYNK REACH
ON
Volume
TICKER OFF
Description
Determines the Sub AMP operation mode.
0: Turns the Sub AMP function off (PWM off).
1: Determines the Sub volume according to the main volume
control.
The sub volume is determined according to the Power On Volume,
the Min Volume, and the Max Volume.
2: Determines the volume according to the bathroom control panel
setting.
Sub AMP Volume level during initial conditions at power-on.
This feature adjusts the brightness of the TV in order to reduce
power consumption.
- Off: Turns off the energy saving function.
- Low: Sets the TV to low energy saving mode.
- Medium: Sets the TV to medium energy saving mode.
- High: Sets the TV to high energy saving mode.
Display the Welcome Message.
Edit the Welcome Message.
Use to set the logo display Off or to set the logo file type. (BMP/
AVI).
Downloads the Hospitality logo.
Hospitality logo file requirements:
BMP or AVI files only.
Max file size : BMP - 1280x720. AVI - 50MB max.
The file can only be named samsung.bmp or samsung.avi.
Set the logo Display Time (3/5/7 Seconds).
Clone the current TV option values to a USB memory device.
Clone the saved TV option values in a USB memory device to the
TV.
When Setting Auto Initialize is set to On, and the power is turned
off and on or the Master Power is turned off and on, the data is
restored to the cloned values.
If there is no cloned value, Setting Auto Initialize is set to On, it will
be ignored and the operation will be the same as that when Setting
Auto Initialize is set to Off
Standby REACH occurs according to the time setting
ON: Whenever the TV enters standby mode (the power cord is
plugged in and the power is off), the REACH data is updated on
the TV.
OFF: The REACH data is only updated on the TV at the REACH
Server update time.
Assign a DTV channel number to carry the update REACH data.
This channel number must be the same as the number set on the
REACH Server.
Displays the current REACH data version.
Select the group ID of the REACH Server. (Refer to the REACH
Server manual for more details.)
ON : The S-LYNK REACH menu is displayed.
OFF : The S-LYNK REACH menu is not displayed.
ON : The TV sound of the current TV source is continouly outputted
even when the S-LYNK REACH menu is displayed.
OFF : The TV sound of the current TV source is stopped when the
S-LYNK REACH menu is displayed.
ON : The TICKER content is displayed.
OFF : The TICKER content is not displayed.
2013-03-21 4:36:56