Samsung HG690 Installation Manual page 30

Plug & Play OSD
– Initial Highlight: Interactive
– If Standalone Only button is selected, Standalone hotel mode is set by default and "Standalone mode is set"
OSD is displayed for 3 seconds.
– TV enters into RF mode automatically after displaying "Standalone mode is set" OSD for 3 seconds.
– When Interactive mode is selected, the Interactive Setup Menu appears. Press the power off button to exit from
the Interactive menu.
– When Standalone Plug & Play mode is selected, the "Select Menu Language" OSD is displayed.
Select Menu Language OSD
– When Standalone Plug & Play is selected from "Easy Set Up" OSD, "Select Menu Language" OSD is displayed.
– Initial Highlight : English
– Display time: OSD timeout and operation are the same as Samsung's consumer TV models.
– If the ENTER
Select Country
– Initial Highlight: United Kingdom.
– The Country OSD is displayed and the area can be selected.
Clock setting OSD
– Display time: 30 seconds.
– The Clock Set item OSD is displayed
– If ENTER button is pressed after setting the clock or in Auto, Picture Mode OSD is displayed.
Auto Search Mode OSD
– If skip option is selected, this goes to Clock setting OSD.
– If the ENTER
– The OSD Display time, from the time that Auto Store is started to the time that Auto Sort is completed, is 30
seconds.
Picture Mode OSD
– Initial Highlight: Standard.
– The Picture Mode OSD is displayed and the Dynamic or a Standard Picture mode can be selected.
– After selecting the picture mode and the TV enters Standalone Setup Menu OSD, press power off to exit.
30
English
[HG690_EURO]Install_Guide-00ENG.indd 30
button is pressed, "Select Area" OSD is displayed.
button is pressed, auto searching of channels is performed.
2013-03-21 4:37:00