Nokia A032 User Manual page 99

Command
ping Causes the Nokia A032 to issue an ICMP Echo request (PING) to a
specified IP address. The format of the command is:
where xx.xx.xx.xx is the destination IP address yy is an optional
parameter which causes the command to enter a loop and ping the
address every yy seconds.
If yy is specified the command will repeat indefinitely; type Ctrl-C
to terminate the command and return to the
restart Causes the Nokia A032 to re-initialize. This is equivalent to turning
the power off and on again. Normally this command is issued after
configuration changes. Restarting the unit can be disruptive to
currently connected users.
set See page 70.
Command line interface
ping xxx.xxx.xxx.xxx yy
Description
CMD:
prompt.
93