SNMP configuration
SNMP manager
Specific details of setting up the SNMP agent in
the Access Point are given in SNMP setup on
page 63. Three types of information can be
configured:
•
The configuration allow for the System info
(Name, Location, Contact) to be configured
and stored.
•
The configuration allows for up to four
SNMP managers to be defined. This is not
required if only Get functions are required.
By checking the
SNMP configuration, access restrictions are
removed. However, traps can only be sent
to nominated managers as defined in the
configuration.
•
The configuration screen allows entry of the
SNMP community names for both Get and
Set. Although set is not supported in the
Access Point, the definition of the
community name is provided for
consistency.
allow any manager
box in
125