Nokia A032 User Manual page 185

110000: Bad PCMCIA hardware
Indicates that there is a failure of the PCMCIA
slot. Unit must be repaired by dealer.
110001: No PCMCIA
Indicates that no PCMCIA card has been
detected. This will occur if the PCMCIA slot is
empty or the radio card did not seat properly.
The unit may pause with this code for a short
time, and then initialize properly.
110010: Bad PCMCIA card
Indicates that the PCMCIA card is not
compatible with the Nokia A032. This may be
because it is not a radio card or because it is an
incompatible radio card.
110011: Bad radio (does not initialize)
Indicates that the PCMCIA radio card does not
respond to initialization requests. This may
indicate that the card is faulty. Try using an
alternative radio card.
110100: Bad firmware version
Indicates that the PCMCIA radio card has an
incompatible version of firmware loaded. The
manufacturer of the radio card will normally
supply utilities to allow you to upgrade the
firmware in the cards to the required version.
001000: Bad DRAM (stuck address)
001001: Bad Ethernet RAM (stuck address)
Indicates a hardware memory problem in the
unit. Unit must be repaired by dealer.
Startup problems 179