Demonstration Mode Setting; Muting Volume Upon Reception Of; Phone Call - Kenwood KDC-X8016BT Instruction Manual

"Forced CD-DA" Sets the CD read mode.
"Settings 1": Automatically distinguishes
between audio file disc and music CD when
playing disc.
"Settings 2": Forces playing as music CD.
"Favorite Delete" Deletes Favorite Preset Memory.
Refer to <Favorite Preset Memory Delete>
(page 40).
"Built in AMP" Selecting "OFF" turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
"OFF"/ "ON"
"Panel Beep" Informs you by sound that you forgot to detach
the faceplate when ACC is set to OFF.
"ON"/ "OFF"
"DSI" DSI (Disabled System Indicator) of the unit blinks
when the faceplate is removed.
"ON"/ "OFF"
5
Make a setting
• When the " " icon is displayed (at the
PUSH
right edge of the display)
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
• When the " " icon is not displayed
PUSH
Press the [4] or [¢] button to select a
setting value.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.

Demonstration mode Setting

Turning the demonstration mode ON/OFF.
1
2
3
4
( : Factory setting)
Function of KDC-X7016/ KDC-X7016L

Muting volume upon reception of

Phone call

The audio system automatically mutes when a call
comes in.
When a call comes in
Listening to the audio during a call
When the call ends
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
Enter Menu List mode
Press the [MENU] button.
Enter Demonstration mode setting
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "DEMO Mode".
Set the Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "ON" or "OFF".
Exit Menu List mode
Press the [MENU] button.
"CALL" is displayed.
The audio system pauses.
Press the [SRC] button.
The "CALL" display disappears and the audio system
comes back ON.
Hang up the phone.
The "CALL" display disappears and the audio system
comes back ON.
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (Quick
Start Guide).
31
|
English