Tuner Operation; Basic Operation; Tuner Setting; Station Preset Memory - Kenwood KDC-X8016BT Instruction Manual

Tuner Operation

SRC MENU VOL
4 ¢

Basic Operation

Selecting Tuner source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select the "Tuner" display.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
Selecting the Receiving Band
Press the [SEARCH MODE] button.
Pressing the button switches the receiving band
(FM1, FM2, FM3, AM).
Selecting the Receiving station
Press the [4] or [¢] button.
✍ Details of the station selecting in operation are
set in the "Seek Mode of <Tuner Setting> (page
18).

Tuner Setting

You can select following Tuner Setting items.
1
Select Tuner source
2
Enter Menu List mode
Press the [MENU] button.
3
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Settings".
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
"Settings"
"Seek Mode" Selects the tuning mode of the radio.
"Auto1": Automatic search for a station.
"Auto2": Search in order of the stations in the
Preset memory.
"Manual": Normal manual tuning control.
18
|
KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L
"Auto Memory" Memorizes 6 stations with good reception
automatically.
Refer to <Auto Memory Entry> (page 19)
"Forced MONO" You can reduce the noise when stereo broadcasts
are received as monaural.
"OFF"/ "ON"
5
Make a setting
Press the [4] or [¢] button.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Remarks
• Forced MONO
Strong electrical fields (such as from power lines) may
cause unstable sound quality when it is set to ON. In such
a situation, turn it OFF.

Station Preset Memory

Putting a station in the memory.
1
Select the radio band and tune in a desired
radio station you wish to store in the preset
memory
2
Enter Menu List mode
Press the [MENU] button.
3
Enter Preset Memory mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "List & Memory".
4
Select the number to put in the memory
Turn the [VOL] knob and press it for at least 2
seconds when the desired item is displayed.
Select a preset number.
Display Overview
"List & Memory"
"-1" Preset number 1.
"-2" Preset number 2.
"-6" Preset number 6.
Cancelling the Preset Memory mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
( : Factory setting)