Calling A Number In The Call Log; Calling A Number In The Phone; Make A Voice Dialing Call; Registering To The Preset Dial - Kenwood KDC-X8016BT Instruction Manual

Function of KDC-X7016/ KDC-X7016L

Make a Voice Dialing Call

1
Enter voice recognition mode
Press the [VOL] knob for at least 1 second.
2
"PB Name?" is displayed.
When a beep is heard, say the name within 2
seconds.
3
"PN Type" is displayed.
When a beep is heard, say the category name
within 2 seconds.
4
Make a call
Press the [VOL] knob.
✍ This step is the same as step 4 of the procedure
in <Calling a Number in the Phone Book> (page
24). You can make a call or select a category.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the [VOL] knob allows you to retry
voice input. Refer to <Troubleshooting Guide> (page 56).
• Both the name and category require registration of
a voice tag. Refer to <Setting a Voice Command for
Category> (page 46).
• Audio sound is not output during voice recognition.
Registering to the Preset Dial Number
List
1
Select the phone number you wish to register
Select the phone number with reference to the
following:
- Calling a Number in the Phone Book (page 24)
- Calling a Number in the Call log (page 24)
2
Enter Preset Memory mode
Press the [VOL] button for at least 2 seconds.
3
Select the Preset number to put in the
memory
Turn the [VOL] knob and press it for at least 1
second when the desired item is displayed.
Select preset number.
4
Determine the Preset number to put in the
memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Exit the Preset Memory mode
Press the [MENU] button.

Display of Phone Number type

(category)
The category items in the Phone Book are displayed
as follows:
Display
"GENERAL" / " "
"HOME" / " "
"OFFICE" / " "
"MOBILE" / " "
"OTHER" / " "
Information
General
Home
Office
Mobile
Other
|
English
25