Windshield Wiper/Washer Switch - Hyundai Getz Owner's Manual

B350A01A-AAT
WINDSHIELD WIPER
WASHER SWITCH
The windshield wiper switch has three
positions:
1. Intermittent wiper operation
2. Low-speed operation
3. High-speed operation
NOTE:
To prevent damage to the wiper
system, do not attempt to wipe away
heavy accumulations of snow or
ice. Accumulated snow and ice
should be removed manually. If
there is only a light layer of snow or
ice, operate the heater in the defrost
AND
mode to melt the snow or ice before
using the wiper.
B350B01O-GAT
Windshield Washer Operation
HTB019A
To use the windshield washer, pull the
wiper/washer lever toward the steer-
ing wheel. When the washer lever is
operated, the wipers automatically
make two passes across the wind-
shield. The washer continues to oper-
ate until the lever is released.
FEATURES OF YOUR HYUNDAI
NOTE:
o Do not operate the washer more
than 15 seconds at a time or
when the fluid reservoir is empty.
o In icy or freezing weather, be sure
the wiper blades are not frozen to
the glass prior to operating the
wipers.
o In areas where water freezes in
winter, use windshield washer
antifreeze.
Mist Wiper Operation
HTB021A
If a single wipe is desired in mist, push
the windshield wiper and washer con-
trol lever upwards.
1- 63
HTB022A