History Log; Set Date & Time - Bosch Solution 64 User Manual

Solution 64 | User Guide
If viewing non-system trouble conditions, the keypad will
display similar to the following:
Zone 1 Name Z001
EOL = Open
Press OK or MENU
3. Press [OK] or [MENU] to exit the system trouble menu
command:
If there are no system troubles, the keypad will display:
There are no
System troubles.
Press
Refer to the Trouble Messages table for a complete list of
trouble events and their meanings.
System > Commands >

History Log

This menu allows you to review the last 256 history events (from
most recent to least recent).
Each event will display:
Line 1 - Displays Event Number
- Date / Time
- Destination 1 and/or 2 report status (S= Sent, P =
Pending, F = Fail, A = Abort and L = Log Only).
Line 2 - Displays the source of the event (eg. zone name and
zone number or user name and user number)
Line 3 - Displays the event description.
24
OK or MENU
MENU 7-0-2
1. Press [MENU] + [7] + [0] + [2].
The keypad will display the most recent event stored in the
history log.
E001 Mon,01Oct 03:41 S1L2
Manual Test Report
Press
2. Use the [ ] and [ ] keys scroll between history events.
3. Press [OK] or [MENU] to exit.
System > Clock >
Set Date & Time
This menu allows you to program/adjust the date and time in the
Solution control panel.
1. Press [MENU] + [7] + [1] + [0].
The keypad will display the current date and time.
Set Date And Time
01-Jan-2004
Press
2. Use the [ ] and [ ] keys to program the month, day, year,
hour and minute. Use [ ] and [ ] keys to scroll cursor left
and right to between the month, day, year, hour and minute.
3. Press [OK] to save and exit, or press [MENU] to exit without
saving.
OK or MENU
MENU 7-1-0
04:37am
OK to SAVE
Bosch Security Systems | 12/05 | BLCC110U