Tokens; Add Token; Delete Token; Token Status - Bosch Solution 64 User Manual

Tokens

This section outlines how to add and delete token cards that
allow an alternate method for users to turn the system on and
off via a prox reader enabled Keypad or an external reader. The
system can also be configured to automaticall open a door if it
has been fitted with an electric door lock. You should discuss
this feature with your installer for more details on your particular
installation.
A token is a small plastic tag card that has a unique ID. A user can
place the token card in front of a keypad that has a built-in token
reader to turn the system or specific areas on and off.
Access > Token >

Add Token

This menu allows a Master user the ability to add a new token for
for those users that have been assigned to the same area(s) as the
Master user.
1. Enter [MENU] + [1] + [2] + [0].
A list of users will display on the keypad.
2. Use the [ ] and [ ] keys to select the user that you want to
add a token for, then press [OK] to select.
U001 JOHN SM N
U002 DEBBIE SMITH
U003 USER 3 NAME
Press , OK or MENU
3. If you are using a keypad with built in reader the system will
prompt you to present the token to the keypad. Once the
token is presented the keypad we beep and return to the
menu.
To Add token for U001
JOHN SMITH swipe new
token
4. If you are learning the token via an external reader the
system will prompt you to select the reader to learn from.
Use the [ ] and [ ] keys to select the reader and then repeat
step 3 presenting the token to the external reader.
A Master user can only delete a PIN for those users that have
been assigned to the same area(s) as the Master user. A Master
user cannot delete their own PIN.
Access > Token >

Delete Token

This menu allows a Master user the ability to delete a token for
those users that have been assigned to the same area(s) as the
Master user.
1. Enter [MENU] + [1] + [2] + [1].
A list of users will display on the keypad.
2. Use the [ ] and [ ] keys to select the user who's token you
want to delete, then press [OK] to select.
Bosch Security Systems | 12/05 | BLCC110U
MENU 1-2-0
ITH
MENU 1-2-1
U001 JOHN SM N
U002 DEBBIE SMITH
U003 USER 3 NAME
Press , OK or MENU
3. When prompted press the [OK] key to confirm token
deletion.
Access > Token >

Token Status

This menu allows a Master user the ability to identify a token
which has been programmed into the system. Only tokens that
have been assigned to the same area(s) as the Master user cn be
identified.
1. Enter [MENU] + [1] + [2] + [2].
The system will prompt you to present the token to the
keypad.
2. Once the token is presented the system will display the
owner of the token.
Token belongs to ur002
DEBBIE SMITH
Press OK or MENU OK or OK or M M ENU

RF Keyfob

This section outlines how to add and delete RF keyfobs that allow
an alternate method for users to turn an area(s) on and off. The
RF Keyfob must be compatible with the RF Receiver that has been
installed by the security company.
Access > RF Keyfob >

Add Keyfob

This menu allows the security installer or a master user to
program the user's keyfob ID number.
1. Enter [MENU] + [1] + [3] + [0].
A list of users will display on the keypad.
U001 JOHN SM N
U002 DEBBIE SMITH
U003 USER 3 NAME
PRESS , OK or MENU
2. Use the [ ] and [ ] keys to select the user that you want
to add the RF keyfob ID, then press [OK] to select.
Alternatively, you can enter the user number you, then press
[OK].
The keypad will prompt you to enter the RF keyfob ID number:
Enter keyfob RFid for
U016 User 16 Name
000000000
Press OK or MENU
Solution 64 | User Guide
ITH
MENU 1-2-2
ENU
MENU 1-3-0
ITH
11