Table of Contents
Advertisement
Available languages
Available languages
Door rEVErSal
If you want to reverse the direction of the door, it is recommended calling a
qualified service technician.
1. Unplug the power cord.
2. Remove the four hinge screws from the door
3. Remove the door by lifting it
4. Remove the two screws from the holder-lever, and then remove
the cover-holder.
5. Assemble the holder-lever on the opposite side using the screws
that were removed from the holder-lever-in Step 4.
6. Assemble the cover-holder on the opposite side.
7. Remove the two cover-hinges.
8. Assemble the two cover-hinges
on the opposite side.
Use a flat head screwdriver(-)
to remove the cover-holder's
cover-hinge.
9. Remove the 14 screws.
Two screw (L) are longer than the other screws.
English - 19
l
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the DV48H7400E DV48H7400G and is the answer not in the manual?
Questions and answers
Filter check flashing red no lint in filter dryer won’t start no error code
The flashing red filter check light on the Samsung dryer model DV48H7400E/DV48H7400G indicates that the lint filter needs to be cleaned. If the dryer is not starting, it may be due to a clogged or improperly inserted lint filter. Clean the lint filter and ensure it is correctly placed before attempting to start the dryer again.
This answer is automatically generated
Doesn't turn off and can't be controlled with buttons at all
The Samsung DV48H7400E/DV48H7400G may not turn off or respond to button controls because the Child Lock function is activated. When Child Lock is on, no buttons except the Power button will respond, and the Child Lock indicator will be lit. To restore button function, the Child Lock must be turned off by following the specified instructions.
This answer is automatically generated