The WMF 8000 S coffee machine is a fully automatic single cup machine for espresso, café crème, cappuccino, milk coffee, latte macchiato, milk foam and hot water. With its optionally available powder hopper, the WMF 8000 S can also make hot chocolate with milk or milk foam. Follow the User Manual CaUtion >...
Page 5
Hazards to the operator Hazards to the coffee machine intended use Directives Duties of the owner / operator Warranty claims appendix: technical data technical data for coffee machine Conditions for usage and installation appendix: accessories and spare parts index User Manual WMF 8000 S...
Introduction | Parts of the coffee machine introduction parts of the coffee machine Display Espresso Cappuccino Café cr ème Latte macchiato Milk Choc Milk coffee Chociatto Foam User Manual WMF 8000 S...
Page 7
Hot water spout Special buttons (hot water) Side illumination Operating panel ON/OFF switch “ready to operate” display Beverage buttons Manual insert pad “Warm rinse” pad Page up and down Menu pad (opens the main menu) Barista pad Message pad User Manual WMF 8000 S...
• Instructions for safe use and tips for easier operation. Call up the main menu Touch the Main menu pad The main menu is displayed. There are other display options w M ain menu. User Manual WMF 8000 S...
Prior to brewing cycle, coffee is briefly infused in order to ensure a more intense release of its aromatic substances. Pressing Automatic pressing of ground coffee prior to brewing cycle. Rinsing Intermediate cleaning SB mode Self-service customer operation (self-service mode) User Manual WMF 8000 S...
• Only use products that are suitable for Observe the Safety chapter consumption and for use with the coffee w s tarting on page 63 machine. > The bean hopper and manual insert may only be filled with materials for the use intended. User Manual WMF 8000 S...
Button allocation Only with a manual cup table: w O perating options Slide the cup table to the correct height page 29 Touch the desired beverage button Cancel beverage Touch the desired beverage button again User Manual WMF 8000 S...
Place a cup of the appropriate size beneath the combi w C up volume spout page 24 Touch the beverage button assigned to milk or milk Start-Stop or metered foam Dispensing occurs according to the dispensing option. User Manual WMF 8000 S...
Insert milk hose into the milk pack The hose must reach to the floor of the milk package. 2.8.2 With WMF Cooler, WMF Cup&Cool (optional) Remove the milk container out of the Cooler Push the milk container lid back ...
90 °C. > Fill the jug no more than half full. > Do not overheat milk when foaming, otherwise milk foam volume decreases. 2.10 Easy Steam Beverages can be heated using the Easy Steam outlet User Manual WMF 8000 S...
• Foreign objects can damage the coffee grinder. iMportant This damage is not covered under the warranty. > Ensure that no foreign objects land in the Observe the Warranty chapter w s tarting on page 71 coffee bean hopper. User Manual WMF 8000 S...
Touch the “Manual insert” preselection pad Touch the desired beverage button The manual insert opens automatically. Add the desired amount of ground coffee with the small measuring spoon (maximum 16 g) Close the manual insert The desired beverage is dispensed. User Manual WMF 8000 S...
M anual cleaning container and the coffee machine base have an opening page 49 that passes through the on-site counter on which the machine is placed. The spent coffee grounds are collected in a separate container under the counter. User Manual WMF 8000 S...
The ON/OFF switch is on the right side, behind the operating panel. Press the ON/OFF switch briefly (approx. 1 second) Coffee machine switches off. Disconnect mains plug Turn off main water supply tap PIN access control w P IN rights page 35 User Manual WMF 8000 S...
To the main menu Confirm value / setting To previous menu Delete value / setting PIN entry Preparation test Next, Forward, Start Back Show help text Show keyboard Save settings Load settings Messages on the display Milk temperature display Error message (optional) User Manual WMF 8000 S...
15 % stronger than the setting * touch 2x 1 beans 15 % weaker than the setting * * Maximum amount of ground coffee 19 g per brewing cycle The coffee strength will be altered for the next brewing cycle only. User Manual WMF 8000 S...
• Mixer rinsing • Milk system rinsing • Foamer rinsing CleanLock CleanLock Touch CleanLock A 15-second countdown starts. The touch display can now be cleaned. The touch display is activated again 15 seconds after the last brewing cycle. User Manual WMF 8000 S...
Filter change (optional) Filter change Available only if authorization has been issued to trained personnel by WMF Service. Beverages general information Dispensing test For many beverage settings, it is possible to start a dispensing test with the new settings before the recipe...
The dispensing runs until the set amount is reached. The dispensing can be stopped sooner by pressing the button again. • Metered The set volume is dispensed. The dispensing option is available for milk, foam, and for hot water. User Manual WMF 8000 S...
The software indicates whether desired options are not technically possible. Storage factory additions The additions that can be used for the recipe are shown here. Touch the desired addition and slide it into the current recipe composition User Manual WMF 8000 S...
The saved and current data are displayed. The current values The values saved by Service The factory values ground coffee quantity Enter in grams (g) Water volume / milk volume Enter in milliliters (ml) Brewing temperature Enter in degrees Celsius (°C) User Manual WMF 8000 S...
Same as for Quality 6, but with longer wet pressing. Select coffee grinder The entire portion of the amount of ground coffee to be ground is 10. The total amount can be made up from various grinders. This makes complex, individual recipes possible. User Manual WMF 8000 S...
The cup height for the beverage is set here. the beverage button is selected. A cup height can be assigned to the cup symbols on the right side. These heights are saved and can be accepted by touching the symbol briefly. User Manual WMF 8000 S...
28 Swap buttons The positions of two beverage buttons are swapped here. Touch a beverage button Touch the “Change buttons” pad Touch the beverage button that is to be swapped Confirm the swap User Manual WMF 8000 S...
Default value: inactive temperature preselection hot water Options: • active • inactive Default value: inactive active After the hot water button is pressed, three dispensing temperatures are displayed for selection. inactive There is no temperature selection available. User Manual WMF 8000 S...
Previously selected beverages are dispensed without an additional button press. Cancel beverage Options: • active • inactive Default value: active Menu pad Options: • immediate • delayed Default value: immediate Error message Options: • Text • Symbol Default value: Text User Manual WMF 8000 S...
The weekly overview of the timer opens. All switch on and switch off times are displayed in this overview. Service Service Contact data for WMF Service. Serial number of the coffee machine. Care Care The last cleaning and care actions that run via coffee machine programs are displayed here.
Counter 2 = week counter Counter 3 = month counter Counter 4 = year counter Each counter can be deactivated if desired. Vending machines See Vending machines User Manual. Waiter accounting See User Manual for barista accounting. User Manual WMF 8000 S...
On entering the valid PIN, access to: • Care • PIN-protected ON/OFF switch • Milk and foam settings • Timer program • Settings (beverage, general, others) • Assign PIN rights, access control • Accounting numbers of beverages User Manual WMF 8000 S...
09:00 10:00 10:00 20:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00 Detail view of current day Switching between daily and weekly overview. The daily overview shows data for the current day. User Manual WMF 8000 S...
The color can also be defined and set by means of RGB values. There are also the following options: • Change color slowly • Change color normally • Change color quickly • OFF The current setting is displayed immediately. User Manual WMF 8000 S...
Default value: inactive active The illumination during a message can be adjusted. illumination for messages (event) • Tank event color (optional) • Side event color Display brightness Display brightness The brightness of the display is adjusted here. touch display calibration Touch calibration Recalibrate the touch display. User Manual WMF 8000 S...
Enter the filter capacity in liters here. Measured water hardness Enter the measured water hardness in °dKH here. Machine options Machine options For Service only. 3.12 Language The language used in the display is set here. The available languages are displayed in English. User Manual WMF 8000 S...
Data settings, such as machine data, beverage data, etc. are saved here. Load data Load data Data settings, such as machine data, beverage data, etc. are loaded here. (Can be protected by a PIN.) Firmware update Firmware update For Service only. User Manual WMF 8000 S...
Health hazard / hygiene CaUtion • All cleaning agents are perfectly tuned to the Observe the Safety chapter cleaning programs. w s tarting on page 63 > Use only WMF cleaning and descaling agent. User Manual WMF 8000 S...
Page 43
63 when cleaning. • The hot liquids can irritate the skin, and the heat poses a scalding hazard. > Never reach under the spouts while cleaning. > Ensure that no one ever drinks the cleaning solution. User Manual WMF 8000 S...
55 Daily = Daily, at least once per day and as required Weekly = Weekly cleaning Regularly = Regularly as required Automatic = Automatic processing = Daily as required = Optional (depending on the model) User Manual WMF 8000 S...
> Ensure that no one ever drinks the cleaning solution. inStrUCtionS Always slide the cup table to a middle position before the cleaning program starts. The cleaning program provides a step-by-step guide through the system cleaning on the display. Follow the messages. User Manual WMF 8000 S...
Page 46
For system cleaning for coffee machines with Active Milk, the special blue cleaning container is required for cleaning. Start Select the care program Touch Cleaning programs Touch System cleaning Information will be shown on the display User Manual WMF 8000 S...
The milk system rinsing rinses the milk hose, the milk nozzles, and the combi spout. Select the care program Touch Cleaning programs Touch Milk system rinsing Information will be shown on the display User Manual WMF 8000 S...
Clean milk system manually w p age 51 Automatic foamer rinsing Automatic mixer rinsing System cleaning; Standard System cleaning; using Plug&Clean Adapter System cleaning; with cleaning container Daily; clean milk system manually Weekly; clean milk system manually User Manual WMF 8000 S...
Care | Manual cleaning Manual cleaning Order numbers for the WMF care program w A ccessories and spare parts page 74 4.5.1 Clean operating panel (CleanLock) Touch CleanLock to start a 15-second countdown. The touch display can now be cleaned. The touch display is activated again 15 seconds after the last brewing cycle.
Observe the Warranty chapter w s tarting on page 71 > Use soft cloths for cleaning. For cleaning metal cover parts (matte surface) we recommend WMF Purargan® cleaner. 4.5.5 Beneath the coffee machine Remove and clean the catch pan Wipe beneath the coffee machine with a damp cloth...
Remove combi spout Remove milk hose from milk container and release from combi spout Release the mixer hose (if present) Mix 5 ml of WMF Special cleaner with 0.5 litre of lukewarm drinking water Health hazard in case of eye contact CaUtion • In case of eye contact, the WMF milk system...
Rinse thoroughly with clean water Screw the steam nozzle onto the Auto Steam spout Immerse the steam nozzle in a jug with clear water Briefly touch an Auto Steam button Wipe steam outlet with a damp cloth User Manual WMF 8000 S...
CaUtion • If the mixer hose is not firmly attached, Observe the Safety chapter hot water or hot powder beverage can be w s tarting on page 63 discharged inadvertently > Always firmly attach the mixer hose User Manual WMF 8000 S...
Lift bean hoppers out Completely empty bean hoppers and wipe out thoroughly with a damp cloth Allow bean hoppers to dry completely Refill and replace bean hoppers Lock with the multitool by turning clockwise User Manual WMF 8000 S...
Re-assemble and replace the dosing auger and screw on union nuts Portion controller with individual parts. Dosing auger iMportant Ensure correct orientation of discharge. Refill and replace powder hopper Use the multitool to rotate the lock clockwise to close it User Manual WMF 8000 S...
41 established and implemented. With correct installation, care, maintenance, and cleaning, WMF coffee machines meet the requirements described above. If care and cleaning of the coffee machine is not carried out properly, dispensing milk beverages will constitute a food hygiene hazard point.
Page 57
Cool the milk occasionally of milk is sufficient for approx. if needed. 20 cappuccinos. • If little milk is used, cooled milk must be placed in the WMF AG offers a range of refrigeration options refrigerator again during operation. (e.g., WMF countertop coolers or WMF milk coolers).
59 in this instance components affecting safety must be replaced. WMF Service important! You can reach the WMF Service if the local service point is For other maintenance work not known. and repairs, please contact your local WMF Service. The telephone WMF AG...
Empty grounds container Empty grounds container grounds container missing Replace the grounds container correctly Change water filter Call WMF Service Follow water filter instructions. please consult the User Manual Error number is displayed w E rror messages / malfunctions Call WMF Service Error number is displayed w ...
The beverage buttons that are still illuminated can continue to be used. Your WMF 8000 S is provided with a diagnostics program. Any errors that occur are shown on the display. The error messages listed may also be caused by an interruption to the mains electricity supply.
Is the hose kinked? clogged Perform milk cleaning and rinsing oftener, if necessary daily w C leaning interval overview, page 44 w C lean milk system manually, page 51 Dose less powder Dose more water User Manual WMF 8000 S...
> Follow all the safety instructions. Hazards to the operator At WMF, safety is one of the most essential product features. The effectiveness of the safety devices can only be ensured if the following points are observed: >...
Page 64
> Always place a suitable cup under the spout when dispensing beverages. risk of injury CaUtion • Long hair could become caught in the grinder head and drawn into the coffee machine. > Always protect hair with a hairnet before removing the bean hopper. User Manual WMF 8000 S...
Page 65
• The hot liquids can irritate the skin, and the heat poses a scalding hazard. > Never reach under the spouts while cleaning. > Ensure that no one ever drinks the cleaning solution. User Manual WMF 8000 S...
Coffee grinder • Foreign objects can damage the coffee grinder. This damage is not covered under the warranty. > Ensure that no foreign objects land in the coffee bean hopper. User Manual WMF 8000 S...
Page 67
Please observe the following instructions so as to prevent problems with and damage to the coffee machine: • For drinking water with carbonate hardness in excess of 5 °dKH, a WMF water filter must be fitted; otherwise, the coffee machine can be damaged due to build-up of scale.
The use of the device is also subject to the “General Terms and Conditions” of WMF AG and this User Manual. Any other use or use that goes beyond the aforementioned is considered incorrect use. The manufacturer shall not be liable for any damage resulting from this.
Directive 2002/96/EC (WEEE). The declaration of conformity is included with the device. The device bears the CE mark. Any modifications that are not approved by WMF will cause this declaration to become invalid. Currently valid national rules apply in countries outside of the European Union.
These measures are conducted by WMF Service or by WMF authorised service personnel as part of the maintenance work. WMF special cleaning agent Machine cleaning must be carried out using only the w ...
(e.g., User Manuals and maintenance instructions). • With respect to faults which occur as the result of failure to use original WMF spare parts or incorrect assembly by the purchaser or by third parties or by faulty or negligent treatment.
The work must be carried out by authorised installation technicians in compliance with general, country-specific and local regulations. The WMF Service engineers may only connect the coffee machine to existing prepared connection points. WMF Service is neither authorised nor responsible for carrying out any on-site installation work prior to connection.
Page 73
For operating, service, and safety reasons the machine should be installed with a clearance of not less than 50 mm at the sides from the building or non-WMF components. A minimum working space of 800 mm in front of the coffee machine is recommended. A clear height of 1,100 mm from the top of the supporting surface should be ensured.
Page 74
In order to avoid possible faults from arising on our shielded data lines due to potential equalisation currents between the devices, an additional potential equalisation unit should be planned for devices connected to the vending system. (See EN 60309) User Manual WMF 8000 S...
Instructions 23 Connect up the milk 13 Intended use 68 Connect up the milk - Standard 13 Introduction 6 Connect up the milk - With WMF Cooler, WMF Cup&Cool (optional) 13 Counter 34 Cup height 28 Journal 33 Cup volume 24...
Water quality 73 Quality level 27 Water supply 73 Water volume 26 WMF Service 58 Ready to operate 19, 21 “Ready to operate” display 7, 21 “Ready to operate” display pads 19, 21 Removable drip tray with drip grid 7...
Need help?
Do you have a question about the 8000 S and is the answer not in the manual?
Questions and answers
Cod eroare 187