Control Panel; Buttons; Indicators - Epson Stylus C58 Service Manual

Epson Stylus C58/C59/ME 2/C79/D78/C90/C91/C92/D92/T20/T20E/T23/T26/S20/T10/T11/ME 30/T21/T24/T27/S21

1.5 Control Panel

1.5.1 Buttons

The control panel contains following two buttons (non-lock type), which are used to set
and execute some operations. The functions of each button are described in the table
below.
Table 1-21. Operations
Button
Power Turns on or off this unit.
When Paper out occurred
Loads paper.
When Paper jam occurred
Ejects paper.
When Double feed occurred
Clears the error and resumes the printing.
When Ink end or No ink cartridge occurred
Moves the carriage to ink-check position.
Maintenance
When the carriage is in the ink-check position
Moves the carriage slightly to check the adjacent ink cartridge.
When the carriage is in "Ink low" or "Ink out" position
Moves the carriage to the replacement position.
During printing
Cancels the current print job.
When pressed for three seconds
Cleans the printhead.
When the printer is turning on
Print a nozzle check pattern.
*
Power + Maintenance
When the printer is on
Shuts down the printer.
Note * : Hold down [Maintenance] first and press [Power]. Keep the buttons pressed for over
seven seconds.
PRODUCT DESCRIPTION
Function
Control Panel

1.5.2 Indicators

The control panel contains following two LED to indicate some status.
Table 1-22. Indicators
LED
Power [Green] Lights while the printer is turned on.
Lights: Paper out, Paper jam, Double feed, No ink cartridge,
Ink end, Incorrect ink cartridge
Maintenance [Red]
Flashes: Ink low
Power Button
Power LED
Figure 1-2. Control Panel
Revision E
Function
Maintenance Button
Maintenance LED
Confidential
19