SAVING A FILE
This process lets you back up the files you've selected. If you want to back up a lot of files, please see
the next section. Once you have backed up these files to an external USB device they can be played
back on a computer.
You must have a USB device connected to the USB port on the front of the DVR before proceeding.
STEP 1. In your file list to the right of the
playback screen, check the box next to the
file(s) you wish to save.
STEP 2. Click on the Backup button (item
b in
Picture
window will open.
STEP 3. Your device will be listed at the top of
the window showing how much space is
available. Below it, the list of file(s) you wish
to back up will be displayed along with
type, start and end times and size. At the
bottom of the window, the space required
to save the file(s) will be displayed. You
may uncheck any files you do not wish to
back up at this time. The Remove button
will remove all the files from your list.
STEP 4. Choose the video format you want
to save your file(s) in - .AVI or .DAT. Files
saved as .AVI can be played in most video
playback programs.
STEP 5. Press Start to back up your selected
files.
Right-clicking the mouse will exit this window without saving the files.
Right-clicking with the mouse will also exit the playback window.
NOTE! If the video files are in .DAT format, they will not play outside the DVR
without being converted to .avi format using the included General Player
software available for free download at Q-See.com by searching for your
model number and looking under Software. This software can also convert
the .DAT files to .AVI
3.2-4) and the Backup
00 : 00 : 00
1
2
3
4
Start Time Type
02:24:05 M
08:19:52 M
10:01:02 R
10:06:56 A
13:04:46 M
Start Time
01-24-12 10:01:02
End Time
01-24-12 10:02:14
Size(KB)
1701
PICTURE 3.2-5
BACKUP
/
0.00 KB (Space Needed)
0.00 KB/0.00 KB(Free/Total)
Type
All
Record CH
Start Time
2014 - 02 - 24 01 : 00 : 00
End Time
2014 - 02 - 24 05 : 08 : 28
File Format
0
Channel
Type
Start Time
End Time
PICTURE 3.2-6
Browse
1
AVI
Add
Remove
Size(KB)
Play
Start
31
Need help?
Do you have a question about the QC series and is the answer not in the manual?
Questions and answers
Forgot password to login to the system
The document does not provide specific instructions for resetting the password on the Q-See QC series system. However, it strongly recommends changing the default passwords to prevent unauthorized access. If you need to reset the password, you may need to restore the system to factory default settings using the "DEFAULT" button, which resets everything.
This answer is automatically generated
where is the default button