S-DBS Operating Instructions
Section 700
VI .o
issue 1 July 1990
Pooled Trunk Access * <Programming
Required>
To access a pooled trunk
group line with a one-touch
key
1.
Pick up receiver
OR
Press ON/OFF key
2.
Get outside dial tone by dialing access code 9 or 81. 82 or 83.
3.
Dial the telephone number.
The dialed number wiU appear on the
display.
NOTE: To operate this phone system as a Hybrid System, modifications
must be
made by a qutied
dealer for proper re-configuration
and registration
procedures.
Flash Key * <Programming
Required>
To make another call without either replacing the receiver or pressing the ON/OFF
key to get new dial tone.
1.
Get
dial tone by briefly pressing the FLASH key. To disconnect from
PBX lines press the FLASH key for more than one second.