Answering A Call Via The Loudspeaker (Speakerphone Mode); Accepting A Call Via The Headset - Siemens HiPath 500 User Manual

Step by Step
Answer
+
if nec.
+
if nec.
Answering a call via the loudspeaker
(speakerphone mode)
Suggestions for using speakerphone mode
• Tell the other party that you are using speakerphone
mode.
• The speakerphone works bests at a low receiving
volume.
• The ideal distance between the user and the tele-
phone set in speakerphone mode is about 50 cm
(approx. 20 inches).
The phone is ringing. The caller appears on the screen.
n
Press the key shown. The LED lights up.
or
Confirm.
The speakerphone function is activated.
-
or
Set the call volume. Keep pressing the key until the de-
sired volume is set.
Ending a call
n
Press the key shown. The LED goes out.
or
s
Press the key shown.

Accepting a call via the headset

Prerequisite: A headset is connected.
Make sure your headset port is set up properly .
The phone rings. The
o
Press the key shown.
-
or
Set the call volume.
Basic functions
o
key flashes.
33