OPERATING PROCEDURE
12. Removing the reactors (ACL1, ACL2, ACL3)
(1) Remove the service panel. (See Photo 1)
(2) Remove the top panel. (See Photo 1)
(3) Remove the 6 screws, that fix the front panel and remove
the front panel.
(4) Remove the 2 screws, screw
fix the separator, screw
9
from the bottom of the separator, and tilt the separator
to the side of the fan motor slightly. (See Photo 12-1)
(5) Disconnect the lead wires from the reactor and remove
the 4 screws, screw
reactor. (See photo 12-2 and 12-3.)
Note 1: The reactor is very heavy (4kg)!
Be careful when handling it.
Note 2: The reactor box is also removable.
Photo 12-2
Reactor box
Reactors
OCH526
8
9
and
(both 4 × 10), that
8
from the valve bed and screw
0
, that fix the reactor to remove the
Photo 12-1
Reactor box
Photo 12-3
Reactor box
104
PHOTOS
Electrical parts box
Screw 9
Separator
0
Screw
Screw8
Valve bed