Hitachi TM3000 Instruction Manual page 203

4. Click [Save] to save the digital zoom image. As a Save Image window appears, enter the
file name, and save the image by selecting the destination of save and the file type. If not
saving the image, click the [Cancel] button.
NOTE : Any of the following characters cannot be used in a file name: [\ / : ; * ? " < > | ! ' &]
(half-width characters).
NOTE : Image files are created under conditions that are pre-selected on the Setting for
Save window. By setting selected conditions and performing digital zooming,
images that match intended conditions can be saved.
Table 4.3.30 Image Type and Digital Zoom Image Save Size
Image only
Image + information
Image + information + comments
After digital zooming is finished, the View mode changes to the Freeze mode.
NOTE : After digital zooming, Quick Save cannot be saved. To perform a Quick Save,
change the View mode to the Freeze mode.
Saved images can be verified by using Explorer. Clicking the [F9] key on the keyboard
displays the folder in which the images are saved.
Figure 4.3.30-5 Save Image Window
Image Type
4 - 90
Image Save Size
640x480 pixels
640x520 pixels
640x550 pixels