Image Mode Button - Hitachi TM3000 Instruction Manual

This is a view mode that renders the current image into a freeze image.
NOTE : Compared with the Slow mode, the Fast mode degrades image quality.
NOTE : To prevent damage to the specimen by the electron beam, if approximately 5
minutes elapses with electron beam irradiation on (HV-ON) and with Freeze
selected in the View mode, the observation operation is canceled (HV-OFF), and a
message is displayed.

4.3.12 Image Mode Button

At the time the system is powered on, the COMPO mode is set. Each pressing of the Image
Mode button changes the settings from
[COMPO] → [Shadow 1] → [Shadow 2] → [TOPO] → [COMPO]→...
The current image mode is displayed below the Image Mode button.
An Image mode can also be selected from [Image mode] on the [View] menu.
For the current image mode, the Menu is check-marked.
Figure 4.3.12-2 Setting an Image Mode (COMPO Mode)
Figure 4.3.12-1 Image Mode Button
4 - 58