Instructions Of Using The Phone; Handset, Speakerphone, And Headset Modes - Huawei eSpace 6850 User Manual

Huawei IP Phone eSpace 6850
User Manual
Key
DND
HEADSET
HOLD
SEND
MENU
<0>~<9>,<*>, and
<#>
Soft keys 1-4
Multi-Purpose Keys

5.2 Instructions of Using the Phone

5.2.1 Handset, Speakerphone, and Headset Modes

You can switch the modes among handset, speakerphone, and headset.



Issue 01 (2012-06-20)
Description
Enable or disable the DND function.
Dial or answer with the headset.
Hold the current call, and press the corresponding LINE key to
resume the call.
Press the key to enter the hands-free mode. Press it again to exit
the hands-free mode.
Hands-free Key
Press the key to send a call after you have dialed phone numbers.
Note:
If you do not press SEND, the number will be sent after a
pre-configured time delay.
After the phone is off-hook, press the key to redial the last dialed
number.
Press the key to receive voice mails or other messages.
Massage Key


Standard phone pad: 10 digits, the corresponding 26 alphanumeric
letters, and special characters.
Three soft keys, which can provide different functions, such as
BackSpace and Cancel.
Implement functions of Speed Dial, Busy Lamp Field, Presence
Watacher, and Eventlist BLF. You can also configure other
functions on the Web page.
The operation of pressing SEND is effective only in the specified dialing time.
To switch between the handset and speakerphone modes, press SPEAKER, that is,
To switch between the handset and headset modes, press HEADSET.
To switch between the speakerphone and headset modes, press HEADSET or
SPEAKER, that is,
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Enter the keypad configuration MENU mode when the phone
is in idle mode.
Use as MENU key to confirm the operation during keypad
configuration.
.
5 Using the eSpace 6850
19
.