Huawei eSpace 6850 User Manual page 16

Huawei IP Phone eSpace 6850
User Manual
Menu
Config
Factory
Functions
Network
Reboot
Exit
Issue 01 (2012-06-20)
Configuration Description
 [LCD Brightness]Press LEFT or RIGHT to set the LCD brightness
of the IP phone in active and idle states. The value ranges from 0 to
8.
 [Download SCR XML]Send a request to the HTTP/TFTP server for
downloading a screen saver to replace the original one. For details
on how to configure this service, see the Huawei IP Phone eSpace
6805&6810&6830&6850&6870 Administrator Guide or contact the
administrator.

[Erase Custom SCR]Restore the factory setting for the standby
image.
 [Display Language]Choose this menu to select the language.
 [Time Settings]Set the date and time of the IP phone.
Press LEFT or select Back to return to the main menu.
Display the configuration submenus.

[SIP]Set the SIP server for each account, including Account, SIP
proxy, Outbound proxy, SIP user ID, SIP Auth ID, SIP
password, SIP transport, and Audio CODECs.

[Upgrade]Configure the firmware server and the file download
server. Select either TFTP or HTTP to upgrade the firmware or
configure the phone.

[Factory Reset]Type the MAC address on back of the phone. Press
OK softkey to restore the factory reset settings. Factory reset clears
all configurations and restores the phone to factory settings.
 [Layer 2 QoS]
Configure the 802.1Q VLAN tag and 802.1P priority.
Press LEFT or select Back to return to the main menu.
These items are used for factory testing and not recommended for users.
 [Audio Loopback]Speak to the handset. If you hear your voice in
the handset, your audio works well. Press MENU to exit the mode.
 [Diagnostic Mode]All LEDs are on. Press any key on the keypad to
display the key name on the LCD. Pick up the handset or press
MENU to exit the diagnostic mode.
Press LEFT or select Back to return to the main menu.
Enable or disable the DHCP protocol. Set the IP address, subnet mask,
and gateway address by using the keypad if the static IP mode is
selected.
Reboot the device.
Exit the menu.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuring the eSpace 6850
12