Huawei eSpace 6850 User Manual page 20

Huawei IP Phone eSpace 6850
User Manual
Field
802.1X mode
Iine Keys
Multi-Purpose Keys
Time Zone
LCD Backlight
Brightness
LCD Contrast
Time Display Format
Issue 01 (2012-06-20)
Description
 Static IP Mode:
Configure all of the following fields: IP address, Subnet
Mask, Gateway, Default Router IP address, DNS Server
1 (primary) and DNS Server 2 (secondary).
This parameter is set to perform the 802.1X authentication when
the IP phone is connected to a switch. You can click Disable to
disable the authentication function, and click EAP-MD5 to
perform the registration authentication.
 Identify
ID used during the 802.1x authentication.
 MD5 Password
MD5 password used during the 802.1X authentication.
This parameter is set for specifying function modes of line keys.
By default, the value of Key Mode is Line, which is used by
common lines. If the value of Key Mode is Shared Line, it
indicates that the BroadSoft SCA functions are enabled and that
accounts scattered in various areas can share the line.
The optional values are Speed Dial, Busy Lamp Field(BLF),
Presence Watacher, eventlist BLF, Speed Dail via active
account, and Dial DTMF.
Each key corresponds to an account, that is, a user number is set
for each key.
This parameter controls the date and time display according to
the specified time zone. If the DHCP Option 2 is enabled, the
DHCP server overrides and centrally controls the setting of
Time Zone in the phone. The feature functions on the phone
only when you set the NTP server correctly.
This parameter is set for adjusting the LCD brightness of the IP
phone in active and idle states. The value ranges from 0 to 8.
LCD contrast. The value ranges from 0 to 20.
The LCD time is displayed in 12-hour or 24-hour format.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuring the eSpace 6850
server that the eSpace 6850 detects
on its LAN. To use the PPPoE
feature, set the PPPoE account. The
eSpace 6850 establishes a PPPoE
session if any of the PPPoE fields
are set.
− Host Name and Domain Name:
The special DHCP options that are
added to the DHCP Discover and
DHCP Request after configuration.
Preferred DNS: The eSpace 6850
−
uses the DNS server if Preferred
DNS is configured.
16