System Preparation - Sharp HT-SL72 Operation Manual

System preparation

Make sure to unplug the AC power cord before
installing the unit or changing the position.
Select from three installation methods according to the
preferred position.
1. Using stand (horizontal arrangement)
For 52", 60" or 70" TV Sound Bar assembly
Use Sound Bar cover joint 7-13/32"
(188 mm) for 52" TV.
For model Use Sound Bar cover joint 14-17/32"
HT-SL77 (369 mm) for 60" TV.
Use Sound Bar cover joint 23-3/8" (594 mm)
for 70" TV.
For model Use Sound Bar cover joint 14-17/32"
HT-SL72 (369 mm) for 60" TV.
1. Pull out both joint covers as below.
Sound Bar joint
2. Place the two Sound Bars near to each other and slot in
the Sound Bar joint and its covers as below.
Right
Front side of
the Sound Bar
For 46" TV sound bar assembly
For model Use Sound Bar cover joint 2-5/32" (55 mm)
HT-SL77 for 46" TV.
1. Pull out the joint cover as below.
Sound Bar joint (short)
2. Place the two sound bars adjacent to each other and
slot in the Sound Bar joint and its cover as below.
Front side of
the Sound Bar
Cover
Left
Cover
Right
Left
To fix the Sound Bar stand
1. Peel off the double sided tape separator and attach the
Sound Bar stand cushion at the bottom surface of the
Sound Bar stand.
Sound Bar
stand
Hook
2. Fix the Sound Bar stand as shown.
Note:
Sound Bar stand can be removed
by pulling it off backward from
the sound bar.
Suggestion of the
Sound Bars and
LCD TV horizontal
arrangement.
2. Using stand (vertical arrangement)
For 60" or 70" TV Sound Bar assembly only
Use Sound Bar stand cover : 10 - 2/16" (257 mm).
Use stand base : 13 - 7/32" (336 mm).
1. Pull out the cover of Sound Bar stand as below.
2. Slot in the Sound Bar into the Sound Bar stand and fix
its cover as shown.
E-7
Sound Bar stand cushion
Double
sided
tape
separator
Cover
Sound Bar
stand cover