SOUND BAR HOME THEATER SYSTEM OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. HT-SL70 Sound Bar Home Theater system consisting of Sound Bar and Subwoofer.
Page 2
Accessories The following accessories are included. RCA to Headphone Subwoofer Stand x 2 Audio Cable x 1 HDMI Cable x 1 Sound Bar Stand Cable (1pin - 2 pins) x 1 Cushion x 2 Wall Mount Angle x 2 Pattern Paper Speaker Wire Sound Bar Stand x 2 Sound Bar Cover Joint A...
Page 3
Special Notes HDMI, the HDMI Logo, and High-Definition Multimedia ENERGY STAR ® Program Information Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Products that have earned the ENERGY STAR ® designed to protect the environment through superior energy efficiency.
Sharp, a Sharp authorized service centre or a Sharp authorized servicing dealer. Any defects caused or repairs required as a result of the use of the Product with items not specified or approved by Sharp, including but not limited to, head cleaning tapes and chemical cleaning agents.
Page 5
10 cm (4") of free space along the sides, top and back damage. SHARP will not be held responsible for any of the equipment. damage resulting from use of this unit with a voltage 10 cm (4")
Controls and indicators Sound Bar FRONT VIEW REAR VIEW Reference page 1. Left Front Speaker 4. Right Front Speaker Terminal (Red/Black) ..10 2. Right Front Speaker 5. Left Front Speaker Terminal (White/Black) ..10 3.
Page 7
System preparation 3. Peel off the double sided tape separator and attach the Make sure to unplug the AC power lead before sound bar stand cushion at the bottom surface of the installing the unit or changing the position. sound bar stand. Select from three installation methods according to the Sound bar stand cushion preferred position.
Page 8
System preparation (continued) Using sound bar stand 1. Pull out the cover of sound bar stand as below. Cover Sound bar stand Suggestion of the sound bars and LCD TV arrangement. To mount the sound bar on the wall 1. Fix the brackets to the holes as shown. (For 52"...
Page 9
Driving screws Installing the sound bar SHARP designed the sound bar so you may hang them on Align the wall mount slot at the sound bar to the the wall. Use proper screws (not supplied). See below for wall mount angle.
Placing the system Installation image: Notes: ● As the sound from the system is omni-directional, you can place the speaker anywhere you like. However, it is recommended to place it as close to the TV as possible. ● The front panel of the speaker is not removable. Caution: Do not change the installation direction when the unit is turned on.
System connections Make sure to unplug the AC power lead before making any connections. Subwoofer Right Left Sound Bar White Wall socket AC 120 V ~ 60 Hz CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Speaker connection ●...
Page 12
For details, refer to the operation manual of the TV. ● If you are unable to select external speaker setting from the TV menu (E.g. For Sharp LCD TV, it is named as AQUOS AUDIO SP), turn the CEC OFF and ON again.
Page 13
System connections (continued) Connecting a TV (with AUDIO IN (TV)) Connect to the TV using an audio cable. 1. Method 1 To HEADPHONE terminal Audio cable Subwoofer To AUDIO IN (TV) input terminal Notes: ● Connecting via this method may disable TV internal speakers. ●...
This is normal. ● “AQUOS speaker is enabled” message will be displayed if SHARP LCD TV does not detect HT-SL70 during power on. However the message “AQUOS audio with AQUOS LINK is enabled” will be displayed soon as HT-SL70 is detected.
If something is wrong with this product, check the following Sudden temperature changes, storage or operation in an before calling your authorized SHARP dealer or service extremely humid environment may cause condensation centre. inside the cabinet. Condensation can cause the unit to malfunction.
Specifications As part of our policy of continuous improvement, SHARP Soundbar speaker reserves the right to make design and specification changes for product improvement without prior notice. The Type Full Range speaker system performance specification figures indicated are nominal 2.2 x 11.5 cm (7/8" x 4-1/2") values of production unit.