Door Phone(S) - Toshiba Strata IPT User Manual

STRATA IPT/DKT FEATUREPHONE USER GUIDE

Door Phone(s)

Door phones can be used to call phones selected in system programming. When a door phone
calls, you hear a distinctive ringing tone, one or five times (set in system programming). You can
also call a door phone and monitor the surrounding area. LCD featurephones display the door
phone name ID when calls are made to or from door phones.
The number of possible door phones varies by Strata CIX/CTX system, 01~24 maximum for larger
systems. Check with your System Administrator to find out the names and locations of your
system's door phones and record them below.
Door Phone Name/Location Door Phone Name/Location
To answer a door phone call
When you hear a door phone call ringing, lift the handset or press the ringing button. A door
phone call sounds like chimes (high/low). The extension LED flashes green (in-use) and you are
connected to the door phone.
#5#5
...or to pick up door phone calls ringing someone else's featurephone, press your extension +
+ directory number of the ringing phone.
To call/monitor a door phone
1. With the handset off-hook, press an extension button. You hear dial tone and the
LED flashes green (in-use).
#15
2. Press (hear three tone bursts), then enter the door phone number (01~24, depending on
system size). A two-way talk-path exists between your featurephone and the door phone. The door
phone will not ring. You can audibly monitor the area around the door phone.
To call from a door phone
1. Press the door phone button and then release it. You hear a distinctive ringing tone–one or five
times (set in system programming).
2. When answered, speak at a normal voice level in the direction of the door phone.
61 of 124
Toshiba Business Communications Division