Labelling Feature Buttons - Toshiba Strata IPT User Manual

Labelling Feature Buttons

From the Softphone Setting window, you can change six featurephone button labels on a PDA and
10 on a PC. Changing the label does not change the function. To change the function, see
"Programming Feature Buttons" on page
Note:
If the headset-use feature is enabled, Line 9 (PC) is set as default and will automatically be labeled headset.
To find out what features are assigned to the feature buttons
#9876
1. Dial to enter user programming mode.
HOLD
2. Click on , then click on each individual feature button to see the currently programmed
feature.
Note:
If you reprogrammed the button functions per the instructions in the user guide, you cannot manually exit from
"programming mode." Just wait a few seconds for the system to time out and the SoftIPT will return to idle.
3. To exit user programming mode, wait 15 seconds and programming mode will exit automatically.
To change Feature Button Labels on the SoftIPT
Setup
1. Click the icon (wrench).
2. From the Softphone Setting window (shown right), type in button labels (eight characters
max.), click OK.
STRATA IPT/DKT FEATUREPHONE USER GUIDE
95.
Can enter labels to rename
Lines 1~9 Feature Buttons
Toshiba Business Communications Division
37 of 124