Sharp HT-CN300H Operation Manual page 33

Notes for RDS operation
If any of the following events occur, it does not mean that the unit is
faulty:
"PS", "NO PS" and a station name appear alternately, and the unit does not oper-
ate properly.
If a particular station is not broadcasting properly or a station is conducting tests,
the RDS reception function may not work properly.
When you receive an RDS station whose signal is too weak, information like the
station name may not be displayed.
"NO PS", "NO PTY", "NO RT" or "NO CT" will flash for about 5 seconds, and then
the frequency will be displayed.
Notes for radio text:
The first 8 characters of the radio text will appear for 4 seconds and then they will
scroll across the display.
If you tune in to an RDS station which is not broadcasting any radio text, "NO RT"
will be displayed when you switch to the radio text position.
Whilst radio text data is received or when the text contents change, "RT" will be
displayed.
Notes for PTY Languages:
When you press the DISPLAY button after entering the PS (Programme Service),
PTY Languages mode will be selected. In this mode, PTY names will be displayed
automatically in the local language where an RDS station is located. Eight lan-
guages (including English) are available.
If you tune in to an RDS station which is not broadcasting PTY language data, the
PTY name will be displayed in English.
A PTY name may be displayed in English for a short time, until a signal determin-
ing the local PTY language is received.
PTY languages are also used for the PTY-Search operation at any DISPLAY
except PTY English.
02/6/17 HT-CN300H_(E)4.fm
HT-CN300H
33