Sharp HT-CN300H Operation Manual page 19

Memory 1/2 buttons for other equipment
Memory 1 buttons:
The remote control is set at the factory to operate the Sharp's DVD, TV and VCR.
To operate Sharp products or other companies' equipment that cannot be controlled
by the default remote control, you can memorise their remote control operations
(learn function) (see page 20).
Set the MEMORY 1/2 selector switch to MEMORY 1 to use the Memory 1 buttons.
Memory 2 buttons:
No functions are stored at the factory setting. Memorise the remote control signals
(learn function) of your equipment before use (see page 20).
Set the MEMORY 1/2 selector switch to MEMORY 2 to use the Memory 2 buttons.
1
2
3
4
5 7
6 8
9 10 11 12
Initial setting for Memory 1 buttons:
1
2
3
4
5
6
7
8
9
10 VCR
11 VCR
12 VCR
OPEN
13 AUDIO
14 SET UP
15
13
16 DISPLAY
14
17
15
18 SUB
16
19 ENTER
20
17 19
21 ANGLE
18 20
22 ZOOM
23
22 23 24
21
24 TOP
For details, refer to the operation manual attached to the other equipment.
TV/VCR
Switches the input to TV or VCR.
VCR CH
Switches up the VCR channels.
TV VOL
Turns up the TV volume.
TV CH
Switches up the TV channels.
TV VOL
Turns down the TV volume.
TV CH
Switches down the TV channels.
VCR CH
Switches down the VCR channels.
VCR
Pauses VCR.
VCR
Rewinds the VCR rapidly.
Advances the VCR rapidly.
Stops the VCR.
Plays the VCR.
Switches the DVD sound.
Changes the DVD settings.
Selects the DVD menu.
Switches the DVD display.
Selects the DVD menu.
Switches the subtitle of a DVD.
Validates the menu.
Selects the DVD menu.
Switches the angle of the DVD images.
Zooms the DVD images.
Selects the DVD menu.
Displays the top menu of the DVD.
02/6/17 HT-CN300H_(E)3.fm
HT-CN300H
19