Chapter 5. Lenovo Usb Optical Wheel Mouse; Introduction; Installing The Mouse Suite Software; Installing The Mouse - Lenovo ScrollPoint Pro Mouse User Manual

Table of Contents

Advertisement

Chapter 5. Lenovo USB Optical Wheel Mouse

This chapter contains installation, usage, and maintenance information for the Lenovo USB Optical Wheel
Mouse.

Introduction

The Lenovo USB Optical Wheel Mouse includes a mouse wheel to control scrolling and other functions.
The mouse can be connected to any enabled USB port.
The mouse works with computers that use the following operating systems:
v Windows 2000 Professional
v Windows XP
v Windows Vista
v Operating systems that support USB connectivity
v PS/2 ports on computers using the Windows NT Workstation operating system.

Installing the Mouse Suite Software

Included in your package is a CD-ROM containing installation software for the mouse. To install the
Mouse Suite Software, complete the following procedure:
Note: Please uninstall any previous mouse drivers prior to installing this driver.
1. Turn on the computer and start the operating system.
2. Insert the Device Driver CD into your CD-ROM drive. Click the Driver arrow. If the setup program
does not open, continue with Step 3. If the setup program opens, go to Step 6.
3. Click Start.
4. Click Run.
5. In the command line, type X:\setup where X is the drive letter for your CD-ROM drive.
6. Click OK.
7. Follow the on-screen instructions to complete the Mouse Suite software installation.
Note: When you are prompted, click USB since this mouse uses a USB connection.

Installing the Mouse

This section contains information for installing the mouse in USB mode.
If a PS/2 mouse is plugged into your computer, you must first turn off your computer prior to removing
this mouse. Plug in your mouse and restart your computer. If a message displays indicating that you do
not have a PS/2 mouse connected, ignore the message and continue.
Installing the mouse in USB mode
To install the mouse using the USB connector in Windows 2000, do the following:
1. Insert the USB (rectangular) connector from the mouse into the USB connector on the computer.
2. In the Add New Hardware Wizard window, press the Enter key.
3. In the What do you want Windows to do? window, select Search for the best driver for your device.
4. Press Enter.
5-1
© Lenovo 2005, 2008. Portions © IBM Corp. 2005.

Advertisement

Table of Contents
loading

Table of Contents